... really unique

Application of foam rubber seals

Plastic housing with foam rubber seal:

The plastic housing is manually placed in the workpiece carrier. At the same time, the self-adhesive seal is transported from the large roll (diameter 400 mm) to the dispensing edge of the topex 50 series label dispenser. A pneumatically operated vacuum stamp moves over the seal, the vacuum is activated, and the seal is secured. Following this, the backing film is drawn under the seal by means of a pneumatically operated retractable dispensing edge.

The separated seal is then automatically applied to the plastic housing that was provided previously. The plastic housing is pneumatically transported to a subsequent processing position. The inner core is removed by a pneumatic needle gripper system and placed in a collecting tray.

The housing, which is now fully labelled, is removed manually.

Technical data:

  • topex 50 series label dispenser
  • topex 7150 label control system
  • Driven unwinding of large roll, for roll diameters of up to 400 mm
  • Pneumatically retractable dispensing edge
  • Label handling with two linear axis motions for applying the label on the product
  • Pneumatically operated needle gripper for removing the label inner core
  • Machine frame with protective covering in acc. with Machinery Directive 2006/42 EC
  • Documentation in acc. with Machinery Directive 2006/42 EC