Labelling systems

Fully automatic label dispensers for industrial use

Discover the full power

This series overcomes the toughest challenges in industrial scenarios. It is also ideal for multi-shift operation. The machine automatically dispenses pre-printed labels, functional pre-cut parts and foils up to a width of 160 mm. Reliable, continuous, safe.

Label dispenser

  • Dispensing widths up to 160 mm 
  • Right/left version

Standard handling

Consisting of two pneumatic movements for the separation stroke and pressure stroke. Any pressure stroke up to 350 mm can be selected. The labelling stamp is designed for a flat labelling surface.

Label dispenser

  • Dispensing widths up to 400 mm 
  • Station concept

Handling systems with three or more movements

The labelling stamp is adapted to the respective product surface, e.g. for curved surfaces or for "across-corner" labelling.

End of labelling early warning

  • Sensor for monitoring the label roll diameter
  • Enables short machine downtimes for changing the roll

Label centring unit

  • Pneumatic unit for exact alignment of the label on the labelling stamp 
  • For precise label application, e.g. with PCE membranes 
  • Centring jaws are non-stick coated

Retractable dispensing edge

  • For separation of complex labels and self-adhesive functional components 
  • High precision when transferring the labels from the backing film 
  • Well suited to self-adhesive seals or foams

Vacuum stamp – quick change unit

  • tool-free setup possible
  • integrated feedthrough
  • exact locking via sliding bolts
  • unambiguous assignment with RFID system

    Download PDF



  • Very compact design
  • Can be integrated in any position
  • Can be configured in three dispensing widths: 54 mm, 108 mm, 163 mm (other dispensing widths available as options on request)
  • Right/left version for optimal operation and placement
  • Optimum tension and force distribution on the label tape through integrated dancer roll
  • Ideal for processing self-adhesive functional labels, e.g. PCE membranes or self-adhesive seals and foams
  • Processing of complex label materials through innovative drive concept
  • Integration possible in pneumatic, motorised or robot-supported label handling systems
  • High processing precision through optionally integrated retractable dispensing edge and label centring unit



  • IPC with Win 10 operating system preinstalled
  • Simple and intuitive operation
  • Can be integrated into any interface, e.g. ProfiNet, ProfiBus, TCP/IP, etc.
  • Connection to almost any industrial control system possible, e.g. Siemens S7, Beckhoff, etc.
  • Connection to company-specific networks possible, e.g. VW VASS Standard, Daimler, etc.
  • Optional: integrated I/O functionality to control label handling

Models: 7000 series

Dispensing width50 mm
Outer Ø of roll300 mm
Dimensions (L/W/H)355/215/400 mm


Dispensing width100 mm
Outer Ø of roll300 mm
Dimensions (L/W/H)355/215/400 mm


Dispensing width160 mm
Outer Ø of roll300 mm
Dimensions (L/W/H)610/350/530 mm




Technical Data

Core diameter40/76/100 mm
Max. outer diameter300 mm
Max. label width (subject to type)160 mm
Gap width for synchronisationmin. 2 mm


Temperature+5°C - +35°C
Air humidity10 - 85%


Adhesive labelsRecommendations from topex
Electrical dataVoltage: 230 V
Frequency: 50 Hz
Dispensing speedMax.: 12 m/min
Label detectionOptical via light barrier
Option: capacitive with transparent labels
Option: electromechanical scanning
Control equipmentEnd of label/backing paper torn
  • 64-bit CISC quad-core microprocessor controller, in compact housing with plug-in connections;
    quick change to 1/2 19" housing
  • 4 GB DDR3 RAM
  • 60 GB mSATA SSD hard drive with 20 GB of storage space for backups
  • Integrated real-time clock
  • Integrated 5 V DC fan
  • Overheating protection
  • 7" TFT 1024 x 600 pixels, touchscreen design
  • Menu-guided setup
  • Fault and warning messages in clear language
  • 2 serial interfaces (RS232)
  • 2 gigabit RJ45 LAN interfaces (Ethernet)
  • 4 USB ports
  • Option: remote maintenance via TeamViewer
  • 24 V DC I/O interface to higher-level controller with status LEDs
Optional PLC functions
  • PLC fitted board for sequence control of application handling units
  • Integration of maximum 2 boards in the controller enclosure
  • 12 digital inputs and 12 digital outputs per board
  • A total of 7 pneumatic cylinders or 6 stepper motors (with integrated 24 V DC power unit) can be controlled (both actuator systems can be combined)
  • 24 V power supply can be configured within the controller or by the customer
Optional bus connectionspossible via external hardware interface converters, e.g. Profibus, Profinet, etc.
Option of different language for touchscreen displayEnglish included as standard
Other languages on request


Contact persons

topex helps personally
and competent.

Timo Hirn (Vertriebsleiter)
T: +49 (0)70 26 / 93 16-28
E: t.hirn(at)
ZIP code area 0,1,2 and international
requests (except Austria)
Marc Brunner
T: +49 (0)70 26 / 93 16-33
E: m.brunner(at)
ZIP code area 3,4
Klaus Schwenkel
T: +49 (0)70 26 / 93 16-29
E: k.schwenkel(at)
ZIP code area 8, 9
Andreas Flaig
T: +49 (0)70 26 / 93 16-22
E: a.flaig(at)
ZIP code area 6,7,88,89 and Austria
Celin Munz
T: +49 (0)70 26 / 93 16-34
E: c.munz(at)
ZIP code area 5
Daniel Ankele
T: +49 (0)70 26 / 93 16-25
E: d.ankele(at)
Area of ​​expertise: e-mobility


Individual solutions

Whatever you want.


Contact us

Application reports