self-adhesive information labels supplied on a roll
Separation of self-adhesive foam pads with a height of 5 mm
for cross-wound adhesive tapes with a roll width of up to 400 mm
with self-adhesive technical dual line labels
to prismatic battery cells
Fully automatic 3-sided labelling of canisters with a pressure-sensitive label.
Printing and application of labels on the sides of different-sized cardboard boxes.
Application of pressure-sensitive labels on plastic hoops or barcode clips.
Fully automatic labelling system for processing different folding box formats and fillings
One-sided application of pre-printed labels using topex 7054 series label printers; 54 mm printing width and 300 mm label roll capacity.
topex label dispensers make it possible to apply membranes in plastic control system housings. Membranes are dispensed and checked in the cavity with +/-0.2 mm accuracy.
Fully automatic application of self-adhesive stamped parts on particulate filters. Large range of particulate filter types plus wide selection of sizes.
Application of foam rubber seals in the correct position on plastic housings, using a semi-automatic topex labelling
Labelling of oval plastic buckets in different sizes and with a 2.5 - 10 l capacity. Printing data provided in PDF format; integration into existing transport line.
Application of double-sided adhesive sealing pads (with top covering of adhesive layer) on junction boxes for solar modules, using a fully automatic topex labelling system.
Attachment of self-adhesive protective laminate in the correct position on high-gloss plastic surfaces, using a fully automatic topex 50 series label dispenser.
Marking of diesel pump housings using laser-markable labels with additional paint protection.
Labelling, assembly and testing system for PCE membranes using ultrasonic welding
topex label dispenser for separating compression pads for battery assembly
topex label dispenser for separation and automatic application of compression pads for battery assembly
Camera system for measuring the label position on the component
Ultra high speed contour gauge to detect wrinkles or bubbles.
Flow testing of automatically applied PCE membranes
with pre-printed 10 x 10 mm and 8 x 8 mm data matrix labels
Tamper-evident closure compliant with EU Directive 2011/62/EU
The challenge for topex application technology: to allow ventilation of a diagnostic tool whilst also preventing fluid from entering the device.
A self-adhesive plastic foil is applied to the prismatic battery bodies for thermal and electrical insulation.
Vollautomatische Applikation von doppelseitig klebenden Pads auf Kunststoffteile.
Imprint | Data privacy | Sitemap | Conditions
topex GmbH Daimlerstraße 2 D-73268 Erkenbrechtsweiler Tel. +49 (0)7026 / 9316-0zentrale(at)topex.de